Supply & installation · Dubai & UAE
Decorative epoxy flooring in DubaiSolid colours & patterns for commercial interiors.
DecoPaint supplies and installs decorative epoxy flooring in Dubai, Abu Dhabi and across the UAE. A prepared base, compatible primer, pigmented resin layer and specified protective finish form the floor system. Choose solid colour or a decorative pattern for a showroom, shop, reception or home interior, with the texture and build-up selected for how the space will be used.
- Build-up
- Specified for the use
- Design
- Solid colour or pattern
- Sheen
- Sample-approved finish
- Return to use
- Staged cure & handover
Installation guide
Decorative Epoxy installation starts with the surface.
Looking for a decorative epoxy flooring contractor? We assess the floor, review colours and sheen, prepare the base and install the agreed finish. Tell us about foot traffic, trolleys, cleaning and your reopening date so the quote addresses the whole installation rather than only the visible coat.
Suitable surfaces
Concrete & cement screeds
Sound, compatible bases can be considered after checking moisture, strength, contamination, levels and cracks. The specified system determines the preparation and any moisture treatment.
Existing tiled floors
An overlay is conditional on adhesion and system approval. Loose tiles, joints and unevenness need assessment and preparation; removal may be required.
Occupied commercial interiors
Retail and showroom work needs an agreed access, ventilation and protection plan. Coordinate fixtures, adjacent trades and routes that must remain open before committing to a programme.
Preparation before application
Test moisture and assess the slab, existing coatings and contamination. Mechanically prepare the floor, remove unsound material and agree repairs, levelling or moisture control before priming. Map joints and detail thresholds and drains. Apply only within the selected products' temperature, humidity and recoat limits.
Limits to agree before work starts
- A decorative epoxy specification is not automatically suitable for forklifts, commercial kitchens, chemical processing or heavy workshops.
- Gloss can be slippery when wet. Agree texture and tested slip performance for the intended use; adding texture changes appearance and cleaning.
- Required movement joints remain functional. A continuous-looking finish cannot be assumed to bridge an active crack.
- Exterior sunlight, hot tyres, standing water and chemical exposure need specific assessment. A topcoat does not make every epoxy system suitable outdoors or waterproof a wet room.
Colour, pattern & protective finish
Review a physical sample for pigment, pattern, sheen and texture. Solid colour and marble-effect finishes create different looks; specialist metallic designs have their own options. Confirm the primer, body coat, any decorative layers and compatible topcoat as one system before work begins.
Joints, drains & floor levels
Plan where the resin meets doors, stairs and other flooring. Keep required movement joints in the installation detail. Where wash-down or wet use is proposed, agree falls, drain interfaces and waterproofing responsibilities; a thin resin coat does not correct a floor that drains poorly.
Why people choose it
What makes it stand apart.
01
Colour-led interiors
Compare solid colours and decorative patterns against your fixtures and lighting.
02
An agreed surface texture
Choose sheen and texture together around appearance, daily traffic and cleaning.
03
A planned reopening
Coordinate installation and curing with stock moves, other trades and customer access.
Approve a physical sample.
Review a cured sample in the room's lighting and agree the sheen and slip texture as well as the colour. Decorative patterns vary across a hand-applied floor; request a trial area where pattern control matters. Approve the sample and the proposed system before installation.
Book a sample reviewCustom & combinations
Have a sample, or a finish in mind we haven't shown?
Send us a photo of any sample you'd like matched, or describe a combination of finishes you're after. Message the studio on WhatsApp — it's the fastest way to share a picture and get a straight answer.
- Snap your reference sample — we'll tell you if we can match it.
- Want two finishes blended? Describe the combination and we'll advise.
Replies within studio hours, 7 days a week.
Process
How we install decorative epoxy.
A controlled, on-site sequence — each stage signed off before the next begins.
- 01
Assess & prepare
Check the base and moisture; mechanically prepare and repair the floor to the selected system's requirements.
- 02
Prime & detail
Apply the compatible primer and complete the agreed treatment at joints, edges and transitions.
- 03
Apply the finish
Lay the specified pigmented resin and decorative layers to the approved sample and build-up.
- 04
Protect, cure & hand over
Apply the agreed protective finish, observe the complete system's cure and release access in the approved stages.
AI-generated finish illustrations for colour and texture reference.
At a glance
Decorative Epoxy, in summary.
Investment
Decorative Epoxy installation price
Published guide: AED 220–420 / m². Decorative epoxy flooring cost depends on the preparation, build-up, pattern and finish. Confirm repairs, moisture treatment, detailing, access, exclusions and VAT treatment in your measured installation quote.
- Area, site access and the condition of the existing concrete, screed or tiles.
- Removal, mechanical preparation, repairs, levelling and moisture-control requirements.
- Resin build-up, solid colour or pattern complexity, sheen, texture and protective finish.
- Joints, skirting and thresholds, protection, phased access and working hours.
Best for
- Showrooms
- Retail interiors
- Reception areas
- Residential interiors
- Restaurant dining areas after assessment
Surfaces
- Interior floors
- Compatible skirting details
- Assessed stair finishes
Aftercare
Caring for your decorative epoxy floor.
Remove sand and grit, clean spills promptly and use the cleaner and dilution approved for the installed topcoat. Protect the surface from dragged furniture and abrasive pads. Ask for a cleaning method suited to any textured areas and check specialist chemicals with the installer. Scratches, chips and local repairs can remain visible; agree how future maintenance or recoating will be assessed.
Planning access
When can the surface be used again?
Plan preparation, repairs and each coat's waiting period before the final cure. Light walking, furniture or trolley loading, full operation and wet cleaning may be released at different times. The installer must confirm those stages for the complete resin and topcoat system at the site's conditions. A touch-dry finish is not full cure; agree the written reopening schedule before moving stock or booking customers.
Discuss your reopening dateProject enquiries
Get a decorative epoxy installation quote.
Dubai, Abu Dhabi, Sharjah and the wider UAE.
Send your project location, floor area, current-floor photos and intended use. Include reference colours, expected foot or trolley traffic, cleaning needs and the date the space must reopen. We review the site and samples, then confirm the preparation, resin system, finish and installation programme in the written quote.
Your quote confirms materials and labour, repairs and preparation, access and protection, timing, curing, warranty terms, exclusions and VAT treatment.
Or call +971 50 311 9537
From the work
What our clients say.
Three notes stay in view at once: the lead story, the neighbouring context, and the next surface waiting in the queue.
FAQ
Decorative Epoxy — questions
Don't see your question? Email us — we read every one.
Yes. We assess retail floors, showrooms, reception spaces and residential interiors in Dubai and across the UAE. Tell us about traffic, cleaning, sunlight and your reopening deadline so we can review the right specification.
Our published guide is AED 220–420 per m². The final quote depends on preparation, repairs, resin build-up, colour or pattern, texture, protective finish and access. Request a written scope with exclusions and VAT treatment so you can compare installed prices.
An overlay may be possible after checking the tiles and the proposed system. Loose or hollow tiles, grout lines, moisture and levels need assessment. The installer may require removal rather than coating an unsuitable base.
A decorative pattern can create a veined appearance. Review a cured sample and agree how much pattern variation is acceptable; a hand-applied floor will not duplicate a reference photograph exactly.
Suitability depends on the full system, loading, chemical exposure and required slip performance. A decorative showroom floor should not be assumed to suit a factory, commercial kitchen or pool deck. These uses need a separately checked specification.
Agree separate times for light foot traffic, furniture and trolley loads, full operation and wet cleaning. The resin layers, topcoat and site conditions determine those times. The installer confirms the reopening schedule for the actual system; touch-dry does not mean ready for full use.
Start with a sample
Ready to see decorative epoxy
in your space?
Book a free site visit. Bring your samples, references, and your room. We'll bring the trowel.